Any injury to the teeth surfaces of the sprocket diminishes the life with the conveyor chain.
With typical sprockets, significantly worn sprocket teeth were repaired by teeth padding or even the whole sprocket was replaced. In both situation, restore was expensive and with teeth padding, accuracy was impaired. We produced new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our prospects for that dramatic cost savings in cost and time.
Framework
The teeth could be replaced by two procedures: individual tooth replacement or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on on the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated around the proper.
The over photograph along with the leading proper illustration demonstrate a sprocket for individual tooth substitute. Since the joint face concerning the replaced teeth and the sprocket is formed in a unique arc, the bonding accuracy is high as well as sprocket power is enhanced. On top of that, since the load acting to the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket construction is patented.
There are actually two varieties of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for massive sprockets getting hefty loads and welded sheet steel hubs 
for other applications.
DK Detachable Teeth Sprockets
Tags: