With many years’ experience in this line, we will be trusted by our advantages in competitive price, one-time delivery, prompt response, on-hand engineering support and good after-sales services.Additionally, all our production procedures are in compliance with ISO9001 standards.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant
- Place of Origin:Zhejiang, China
- Brand Name:
-
EPG is willing to cooperate sincerely and develop commonly with friends!
OEM
- Product name:
-
Gearbox
- Color:
-
Customer Request
- Application:
-
Packing Machine
- Ratio:
-
7.5-100
- Material:
-
Cast Iron
- Warranty:
-
1 Year
- Mounting Position:
-
Foot Mounted. Flange Mounted
Supply Ability
- Supply Ability:
- 1111 Bag/Bags per Day
Packaging & Delivery
- Port
- nb
-
Lead Time
: -
Machining of the gearbox To make a worm gearbox, first take a blank of an alloy. A bronze bearing is made in the center of the blank. The hobbing cutter is then used to reduce the diameter of the blank relative to the finished height of the tooth tip on the gear wheel, so the depth of the cut needs to be added to the blank’s diameter. The necessary threading tool is grind to cut the worm. The side clearance on the left-hand side of the cutter tip is allowed for the worm’s pitch angle. The be–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.st finish is put on the cutting tool using a slip stone. Gear blank is then mounted on a turntable that acts as a bearing support. This bearing support is mounted on the rear of the lathe cross-slide with the hobbing cutter mounted between the centers. The two worms are then machined, out of which one is made the cutter and finally the cutter is used to machine the worm gear. Quantity(Bags) 1 – 1 >1 Est. Time(days) 15 To be negotiated
Online Customization
R series reducer is a kind of gear is used to ruducer the motor speed and improve the output torque of the principle of speed reducer. It uses the gear and gear meshing, with advanced design and novel structure of retarding mechanism.It has beenwidely used in metallurgy, mining, petroleum, chemical industry, ship, light industry, food, textile, printing and dyeing.
Details Images
1.Compact construction,saves space for mounting.large load-bearing capacity and long life.
2.High transmission efficiency and low noise.A single machiine can reach a transmission efficiency as much as 96%.
3.Precise division of transmission ratio with a wide range. The combination of machines can produce a large transmission ratio at
a low output rotational speed.
4.Installation:Foot-mounted,B5/B14 flange-mounted,input shaft,hollow output shaft,etc.
Product Paramenters
|
size |
shaft dia. solid（mm） |
center height |
output flange dia.（mm） |
power (kw) |
ratio |
permissible torque(n.m) |
weight (kgs) |
|
17 |
φ20k6 |
75 |
φ120/140 |
0.18-0.75 |
3.83-74.84 |
85 |
4 |
|
27 |
φ25k6 |
90 |
φ120/140 |
0.18-3.00 |
3.37-135.84 |
130 |
5.5 |
|
37 |
φ25k6 |
90 |
φ160/200 |
0.18-3.00 |
3.33-134.82 |
200 |
8.5 |
|
47 |
φ30k6 |
115 |
φ160/200 |
0.18-5.50 |
3.83-176.88 |
300 |
10 |
|
57 |
φ35k6 |
115 |
φ250/300 |
0.18-7.50 |
4.39-186.89 |
450 |
18 |
|
67 |
φ50k6 |
130 |
φ200/250 |
0.18-7.50 |
4.29-199.81 |
600 |
25 |
|
77 |
φ40k6 |
140 |
φ250/300 |
0.18-11.00 |
5.21-195.24 |
820 |
36 |
|
87 |
φ50k6 |
180 |
φ250/300 |
0.55-22.00 |
5.36-246.54 |
1550 |
63 |
|
97 |
φ60m6 |
225 |
φ300/350 |
0.55-30.00 |
4.49-289.74 |
3000 |
101 |
|
107 |
φ70m6 |
250 |
φ350/450 |
2.20-45.00 |
5.06-249.16 |
4300 |
153 |
|
137 |
φ90m6 |
315 |
φ450/550 |
5.50-55.00 |
5.15-222.60 |
8000 |
220 |
|
147 |
φ110m6 |
335 |
φ450/550 |
11.00-90.00 |
5.0-16.31 |
13000 |
400 |
|
167 |
φ120m6 |
425 |
φ550/660 |
11.00-160.00 |
10.24-229.71 |
18000 |
700 |
Company Profie
SPECIALIST IN MAKING ALL KINDS OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL GEAR SPEED REDUCERS, ARALLEL SHAFT HELICAL GEAR REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM GEAR REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, AUTO GEARBOXES, PTO DRIVE SHAFTS, SPECIAL REDUCER & RELATED GEAR COMPONENTS AND OTHER RELATED PRODUCTS, SPROCKETS, HYDRAULIC SYSTEM, VACUUM PUMPS, FLUID COUPLING, GEAR RACKS, CHAINS, TIMING PULLEYS, UDL SPEED VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, GEAR PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS LOW BACKLASH WORM REDUCERS AND SO ON. FURTHERMORE, WE CAN PRODUCE CUSTOMIZED VARIATORS, GEARED MOTORS, ELECTRIC MOTORS AND OTHER HYDRAULIC PRODUCTS
ACCORDING TO CUSTOMERS’ DRAWINGS.
Certifications
FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.
If you have another question, please feel free to contact us.
Packing & Delivery
Why Choose Us
Also I would like to take this opportunity to give a brief introduction of our Ever-Power company:
Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.
We have exported many products to our customers all over the world, we have long-time experience and strong technology support.
Some of our customer :
Italy: GB GEABOX, SATI, CHIARAVALLI, AMA, Brevini
Germany: SILOKING ,GKN ,KTS
France: Itfran, Sedies, Kuhn
Brazil: AEMCO ,STU
USA: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……
-> Our Company with over twelve year’s history and 1000 workers and 20 sales.
-> With over 100 Million USD sales in 2017
-> With advance machinery equipments
-> With large work capacity and high quality control, ISO certified.
……
you also can check our website to know for more details, if you need our products catalogue, please contact with us.
For more detail, please contact us.
